FLOMEC® LCD display RT14 is a fully programmable self-powered flowrate totalizer specifically designed for computing and displaying flowrates and totals from flowmeters with pulse, sine wave or frequency outputs.
The instrument displays resettable (batch) total, cumulative total and instantaneous flow rate in engineering units as programmed by the user.
|Displays:||Large backlit 8-digit numeric display with LCD character, 8-digit reset cumulative totalizer, 5-digit rate display|
|Memory:||All programmed and accumulative data is stored permanently in non-volatile memory|
|Temperature Range:||-4° F to +176° F (-20° C to +80° C)|
|Signal Input:||Pulse/frequency Input with reed switch Hall Effect, Voltage, Current & Coil, dual inputs (A+B, A-B, A÷B)|
|Pulse Output:||NPN transistor, Scalable (20hz, 100mA max.)|
|Rate Outputs:||4-20mA into 750 ohms@24Vdc, NPN/PNP solid state & relay options|
|Intrinsic Safe Option:||Exia IIB T4 (IECEX / ATEX)|
|Battery Power:||Life expectancy 5 years (Unit draws about 70µA under battery). Battery life reduces when rate is displayed and power is not connected.|
|External Power:||Regulated 8-24VDC x 50mA min (Reverse polarity protected)|
|Configuring:||PIN protected data entry|
|Protection Class:||IP66/67 (NEMA 4X) 3 x M16 x 1.5 female conduit entries|
|K-factor Range:||Scale factor i.g. pulses/litre, gallon, etc. programmable range 0.001 – 999,999.999|
|Engineering Units:||Selectable Ltr, gal, m3, kgs, lbs (total)./sec,/min./hr or day (rate)|