DP Series Insertion Impeller Meters

PRODUCT CONFIGURATOR
COMING SOON!

DP Series Insertion Impeller Meters

FLOMEC® Insertion Meters are cost-effective stainless steel meters for measuring the flow of water, fuels, and other low viscosity liquids in pipe sizes 1.5” – 100” (10 – 2500 mm). Insertion Meters are a flexible, economical method to measure large flow rates with small pressure drops and low installation costs, with most applications battery powered with a FLOMEC totalizer. Applications include HVAC, hot and cold water, fire systems, water distribution (management and treatment), boiler feed water, wastewater and hydrant flow testing.

Features / Benefits

  • IP68 (NEMA6) submersible 316SS construction (cable connection only)
  • Intrinsically safe option available
  • DP525 version suitable for “hot tap” installations
  • Quadrature pulse option available for bi-directional flow measurement option

Applications

  • HVAC
  • Hot & Cold Water
  • Fire Systems
  • Water Distribution (Management & Treatment)
  • Boiler Feed Water
  • Waste Water
  • Hydrant Flow Testing

Electronics Options

R3 = Intrinsically safe RT12 with all outputs (GRN housing) [IECEx & ATEX . approved] – Litres calibration

R3G = Intrinsically safe RT12 with all outputs (GRN housing) [IECEx & ATEX . approved] – Gallons calibration

R4 = RT40 rate totalizer with backlit large digit LCD [scalable pulse output, backlight] – Litres calibration

R4 = RT40 rate totalizer with backlit large digit LCD [scalable pulse output, backlight] – Gallons calibration

R5 = RT14 backlit rate totalizer with all outputs (GRN housing) [scaled pulse, alarms, 4-20mA, backlight] – Litres calibration

R5 = RT14 backlit rate totalizer with all outputs (GRN housing) [scaled pulse, alarms, 4-20mA, backlight] – Gallons calibration

F15 = F115 backlit backlit bi-direction, rate/tot, pulse out, 4-20mA

F18 = F018 backlit rate/tot, pulse out, 4-20mA, 10 pt lin, HART

F19 = F018 Intrinsically Safe backlit rate/tot, pulse out, 4-20mA, 10 pt lin, HART