FCS Consumption Kit – Marine

FCS Consumption Kit – Marine

FLOMEC® Fuel Consumption System (FCS) is a complete fuel monitoring system that comprises 2x EGM positive displacement meters coupled with an F127 flow instrument for accurate measurement of fuel consumption rates and total fuel consumption. The FCS can accurately measure fuel consumption of combustion engines by correcting for temperature differences from the inlet to the outlet of the engine. Pulsating flow electronics, eliminating error due to fuel injection pulsation, coupled with integral PT100 resistance thermometers in FLOMEC’s renowned positive displacement meters gives an accurate and economic fuel consumption measurement solution for all engine sizes.

KIT SELECTION
Although each Fuel Consumption Kit consists of the same items, the size of the meter and the process connections change depending on the rate of flow, which is a direct correlation to the size of the engine.

A typical diesel fuel loop system would on average have 3.5 times more fuel in its line than what the engine consumes at full load. With this in mind, selecting the right kit based on the engine’s power output is important to ensure accuracy and the positive displacement meters’ longevity.

The graphs depicted here should be used as a guide when determining the size of kit is required.

KIT INCLUDES:

  • 2 x EGM-Series Electronic Flowmeter
  • 1 x F127 Totaliser
  • 2 x Meter Brackets
  • 1 x Fuel Strainer plus Connector
  • Cable Glands

FCS Consumption Kit – Land

FLOMEC® Fuel Consumption System (FCS) is a complete fuel monitoring system that comprises 2x EGM positive displacement meters coupled with an F127 flow instrument for accurate measurement of fuel consumption rates and total fuel consumption. The FCS can accurately measure fuel consumption of combustion engines by correcting for temperature differences from the inlet to the outlet of the engine. The EGM positive displacement meter provides accurate and economic fuel consumption measurement solutions for all engine sizes.

KIT SELECTION
Although each Fuel Consumption Kit consists of the same items, the size of the meter and the process connections change depending on the rate of flow, which is a direct correlation to the size of the engine.

A typical diesel fuel loop system would on average have 3.5 times more fuel in its line than what the engine consumes at full load. With this in mind, selecting the right kit based on the engine’s power output is important to ensure accuracy and the positive displacement meters’ longevity.

The graphs depicted here should be used as a guide when determining the size of kit required.

KIT INCLUDES:

  • 2 x EGM-Series Electronic Flowmeter
  • 1 x F127 Totaliser
  • 2 x Meter Brackets
  • 1 x Fuel Strainer plus Connector
  • Cable Glands

Click to View

QStar Fixed Ultrasonic Flowmeter

QStar Ultrasonic Flowmeters (UFM) are available in two models: a portable for mobile sampling measurements and a fixed for measuring tasks over an extended period of time for continuous measurements in fixed installations.

Both units use the proven and highly precise ultrasonic transit time difference method. By employing the latest digital signal processors, these robust measurement flowmeters are extremely accurate and drift-free.

Video

QStar Portable Ultrasonic Flowmeter

QStar Ultrasonic Flowmeters (UFM) are available in two models: a portable for mobile sampling measurements and a fixed for measuring tasks over an extended period of time for continuous measurements in fixed installations.

Both units use the proven and highly precise ultrasonic transit time difference method. By employing the latest digital signal processors, these robust measurement flowmeters are extremely accurate and drift-free.

Video

Turbo Pulse Turbine Flowmeters

FLOMEC® TP Series Flowmeters measure flows of low viscosity liquids from 0.5 – 1200 gallons/min (1.8 – 4500 litres/min) in a range of sizes from ½” to 4” (15 – 100 mm). Installation orientation is horizontally or vertically, and they are available with hazardous area ATEX & IECEx, and Intrinsically Safe (IS) certifications.

G2 Series (Precision Turbine Meters)

A full line of FLOMEC® G2 Series Precision Turbine Meters are available in a variety of housing materials. Rugged and dependable, the G2 Series offers:

  • Stainless Steel for most chemicals and fuel products
  • Aluminum for petroleum based products
  • Brass for most water applications
  • PVDF for aggressive chemicals

Image Gallery

Videos

TM Series (Water Meters)

FLOMEC® TM Series Water Meters are accurate, economical and designed to last. Choose TM Water Meters for water processing and irrigation applications:

  • Meets Schedule 80 PVC specifications
  • Standard low-profile display
  • Seven sizes with three fitting types available
  • Flowrates from 1 to 600 gallons per minute (3.8 to 2271 L/min)

Image Gallery

Video