FCS Consumption Kit – Marine

FCS Consumption Kit – Marine

FLOMEC® Fuel Consumption System (FCS) is a complete fuel monitoring system that comprises 2x EGM positive displacement meters coupled with an F127 flow instrument for accurate measurement of fuel consumption rates and total fuel consumption. The FCS can accurately measure fuel consumption of combustion engines by correcting for temperature differences from the inlet to the outlet of the engine. Pulsating flow electronics, eliminating error due to fuel injection pulsation, coupled with integral PT100 resistance thermometers in FLOMEC’s renowned positive displacement meters gives an accurate and economic fuel consumption measurement solution for all engine sizes.

KIT SELECTION
Although each Fuel Consumption Kit consists of the same items, the size of the meter and the process connections change depending on the rate of flow, which is a direct correlation to the size of the engine.

A typical diesel fuel loop system would on average have 3.5 times more fuel in its line than what the engine consumes at full load. With this in mind, selecting the right kit based on the engine’s power output is important to ensure accuracy and the positive displacement meters’ longevity.

The graphs depicted here should be used as a guide when determining the size of kit is required.

KIT INCLUDES:

  • 2 x EGM-Series Electronic Flowmeter
  • 1 x F127 Totaliser
  • 2 x Meter Brackets
  • 1 x Fuel Strainer plus Connector
  • Cable Glands

FCS Consumption Kit – Land

FLOMEC® Fuel Consumption System (FCS) is a complete fuel monitoring system that comprises 2x EGM positive displacement meters coupled with an F127 flow instrument for accurate measurement of fuel consumption rates and total fuel consumption. The FCS can accurately measure fuel consumption of combustion engines by correcting for temperature differences from the inlet to the outlet of the engine. The EGM positive displacement meter provides accurate and economic fuel consumption measurement solutions for all engine sizes.

KIT SELECTION
Although each Fuel Consumption Kit consists of the same items, the size of the meter and the process connections change depending on the rate of flow, which is a direct correlation to the size of the engine.

A typical diesel fuel loop system would on average have 3.5 times more fuel in its line than what the engine consumes at full load. With this in mind, selecting the right kit based on the engine’s power output is important to ensure accuracy and the positive displacement meters’ longevity.

The graphs depicted here should be used as a guide when determining the size of kit required.

KIT INCLUDES:

  • 2 x EGM-Series Electronic Flowmeter
  • 1 x F127 Totaliser
  • 2 x Meter Brackets
  • 1 x Fuel Strainer plus Connector
  • Cable Glands

Click to View

D Series Diesel Flowmeter

FLOMEC® D-Series Diesel Flowmeters are designed for common transfer applications involving diesel fuel, including receipt verification, loading, un-loading, distribution and dispensing where custody transfer (weights and measures) is not required. They are suitable for fleet depots, mine sites, construction sites, farms, marine facilities & portable fuelling applications. The meters are compact and can be used in both pumped and gravity-fed systems.

DP Series Insertion Impeller Meters

FLOMEC® Insertion Meters are cost-effective stainless steel meters for measuring the flow of water, fuels, and other low viscosity liquids in pipe sizes 1.5” – 100” (10 – 2500 mm). Insertion Meters are a flexible, economic method to measure large flow rates with small pressure drops and low installation costs, with most applications battery powered with a FLOMEC totalizer. Applications include HVAC, hot and cold water, fire systems, water distribution (management and treatment), boiler feed water, wastewater and hydrant flow testing.

Turbo Pulse Turbine Flowmeters

FLOMEC® Turbopulse Turbine Flowmeters measure flows of low viscosity liquids from 3 to 7000 litres/hr in a range of sizes from½” to 20″ (12-SOOmm). TP series flowmeters have an axial rotor and flow guides & need to be installed in straight sections of pipe either horizontal or vertical so that the flow is conditioned. TP series flowmeters can be purchased with Exd & Intrinsically Safe (I.S) approvals for use in hazardous areas. Applications include the distribution of fuels, alcohols, solvents, metering of chemicals, insecticides, water & light hydraulic oils.

G2 Series (Precision Turbine Meters)

A full line of FLOMEC® G2 Series Precision Turbine Meters are available in a variety of housing materials. Rugged and dependable, the G2 Series offers:

  • Stainless Steel for most chemicals and fuel products
  • Aluminum for petroleum based products
  • Brass for most water applications
  • PVDF for aggressive chemicals

Image Gallery

Videos