FCS Consumption Kit – Marine

FCS Consumption Kit – Marine

FLOMEC® Fuel Consumption System (FCS) is a complete fuel monitoring system that comprises 2x EGM positive displacement meters coupled with an F127 flow instrument for accurate measurement of fuel consumption rates and total fuel consumption. The FCS can accurately measure fuel consumption of combustion engines by correcting for temperature differences from the inlet to the outlet of the engine. Pulsating flow electronics, eliminating error due to fuel injection pulsation, coupled with integral PT100 resistance thermometers in FLOMEC’s renowned positive displacement meters gives an accurate and economic fuel consumption measurement solution for all engine sizes.

KIT SELECTION
Although each Fuel Consumption Kit consists of the same items, the size of the meter and the process connections change depending on the rate of flow, which is a direct correlation to the size of the engine.

A typical diesel fuel loop system would on average have 3.5 times more fuel in its line than what the engine consumes at full load. With this in mind, selecting the right kit based on the engine’s power output is important to ensure accuracy and the positive displacement meters’ longevity.

The graphs depicted here should be used as a guide when determining the size of kit is required.

KIT INCLUDES:

  • 2 x EGM-Series Electronic Flowmeter
  • 1 x F127 Totaliser
  • 2 x Meter Brackets
  • 1 x Fuel Strainer plus Connector
  • Cable Glands

FCS Consumption Kit – Land

FLOMEC® Fuel Consumption System (FCS) is a complete fuel monitoring system that comprises 2x EGM positive displacement meters coupled with an F127 flow instrument for accurate measurement of fuel consumption rates and total fuel consumption. The FCS can accurately measure fuel consumption of combustion engines by correcting for temperature differences from the inlet to the outlet of the engine. The EGM positive displacement meter provides accurate and economic fuel consumption measurement solutions for all engine sizes.

KIT SELECTION
Although each Fuel Consumption Kit consists of the same items, the size of the meter and the process connections change depending on the rate of flow, which is a direct correlation to the size of the engine.

A typical diesel fuel loop system would on average have 3.5 times more fuel in its line than what the engine consumes at full load. With this in mind, selecting the right kit based on the engine’s power output is important to ensure accuracy and the positive displacement meters’ longevity.

The graphs depicted here should be used as a guide when determining the size of kit required.

KIT INCLUDES:

  • 2 x EGM-Series Electronic Flowmeter
  • 1 x F127 Totaliser
  • 2 x Meter Brackets
  • 1 x Fuel Strainer plus Connector
  • Cable Glands

Click to View

OM Series Mechanical Meter (Oval Gear Meters)

Volumetric flow measurement of clean liquids or low flows. For distribution of fuels, fuel oils, lubricants, alcohols, solvents, blending of bio and ethanol fuels, metering of chemicals, grease, adhesives, ink, insecticides and pumps or gravity fed non-conductive liquids.

Image Gallery

D Series Diesel Flowmeter

FLOMEC® D-Series Diesel Flowmeters are designed for common transfer applications involving diesel fuel, including receipt verification, loading, un-loading, distribution and dispensing where custody transfer (weights and measures) is not required. They are suitable for fleet depots, mine sites, construction sites, farms, marine facilities & portable fuelling applications. The meters are compact and can be used in both pumped and gravity-fed systems.

OM Series Small Capacity (Oval Gear Meters)

The FLOMEC® OM Small Capacity Oval Gear Meters have an increased flow range and offer the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability.

Download CAD models here

Image Gallery

Video

EGM Series Electronic Flowmeter

All Hall Effect pulse meters designed for volumetric flow measurement of clean liquids across a broad range of applications in the automotive, aviation, mining, power, chemical, pharmaceutical, and petroleum industries. The EGM Series will produce accurate and reliable measurements of almost all clean liquids, including but not limited to; alcohols, fuels and oils, water-based salts and solutions, corrosion inhibitors, brake and transmission fluids, greases, emulsifiers, adhesives, insecticides, and some aggressive chemicals.

CLICK TO SEE 360° VIEW

OM Series Medium Capacity (Oval Gear Meters)

The FLOMEC® OM Medium Capacity Oval Gear Meters are great for medium flow ranges and have the ability to handle a wide range of fluid viscosities.

Download CAD models here

Image Gallery

Video