QSE/QSI - The Perfect Match

Take a look at the FLOMEC QSE Mag Meter & QSI I/O Communication Board


FLOMEC's QSE Mag Meter is available in 7 different sizes - Take them for a "spin" below. HINT: Click on the to learn more.
To order this meter contact your local FLOMEC representative, call (888) 996-3837 or email meters@gplains.com

QSE ELECTROMAGNETIC METER

Better Performance,
Higher Quality,
Lower Cost

INTRODUCING THE ALL-NEW FLOMEC® QSE ELECTROMAGNETIC METER - A dependable highly accurate electromagnetic flowmeter designed for flow and usage monitoring in a wide variety of applications including: HVAC, Turf/ Irrigation and other water reclamation applications.

PRINCIPLE OF OPERATION

Faraday’s Law of Electromagnetic Induction is the operating principle on which the QSE series meters are based.

Faraday’s Law (paraphrased) states that a voltage will be induced in a conductor when it passes through a magnetic field, and the induced voltage will be directly proportional to the velocity of the conductor passing through that magnetic field. In this case, flowing liquid is the conductor and the QSE meter creates the magnetic field.

The velocity of the flowing liquid, which must pass through the magnetic field, is the velocity of the conductor. A voltage is induced in the conductive liquid as it passes through the magnetic field. By placing electrodes in calculated locations on the flow tube of the meter, it is possible to accurately measure the induced voltage, thus determining the corresponding velocity and volumetric flow of the liquid.

FEATURES | BENEFITS

  • NSF-61 Certification
  • CSA Certification
  • Low investment and operating costs
  • ± 0.5% accuracy of reading (from 0.25fps to 15 fps)
  • Wide turndown ratio of 60:1
  • Non-intrusive, with no moving parts to wear out, virtually maintenance free and tolerates high flows without damage
  • The slightly modified bore permits unobstructed flow, and minimizes flow disturbances and straight pipe requirements
  • 7 lines sizes (1/2" to 4"): 1/2", 3/4", 1-1/2", 2", 3" & 4"
  • Housing ported with "Thermal Well Supports" for sensors (Energy Management)
  • Compatible with FLOMEC® 09 Electronics Display or FLOMEC QSI I/O Board

APPLICATIONS

Turf / Irrigation
  • Agriculture Irrigation
  • Turf Irrigation Systems
  • Micro Irrigation Systems
  • HVAC
  • EMS (Energy Management Systems)
  • BAS (Building Automation Systems)
Institutional
  • Chilled water
  • Domestic water (hot and cold)
  • Energy sub-metering (BTU hot and cold)
  • Process (blow down, make up, boiler feed, etc.)

APPROVALS

QSI I/O COMMUNICATION BOARD

Available NOW with the QSE. Contact your local representative or CLICK HERE to learn more.